The KMS 105 microphone has been specifically developed to optimally and clearly transmit the human voice within the demanding conditions present on a live stage. The high acoustic resolution and smooth frequency response of the microphone ensure that the musician has control of their performance at all times.
The microphone is also ideal for use with in-ear monitoring systems due to its low self-noise and coloration-free crosstalk behavior, while the supercardioid characteristic of the capsule is particularly good at suppressing sounds originating from the entire 180° hemisphere behind the microphone.
Acoustic Features
The studio condenser capsule provides the basis for transmitting all the nuances of the human voice
Delivers high acoustic transparency, wide frequency range, and a fine resolution of transients when compared to other mostly dynamic handheld microphones
Carefully adjusted acoustic filters and transformerless impedance converters can handle very high sound pressure levels that prevent the microphone from being overloaded, even by strong plosive sounds
In spite of good pop protection, sibilants and "S" sounds are transmitted with their natural accentuation without added harshness
The acoustic filters are designed, so that the distinctive directional characteristics of the capsule are preserved, even in the bass range
The filters ensure a very high level of feedback protection when used with a stage sound system
Electrical Features
Since vocal microphones are typically addressed at close range, electronic compensation is used to adjust for the proximity effect in the capsule
Built-in high-pass filter with a 120 Hz cutoff frequency
132 dB dynamic range
150 dB maximum sound pressure level
Low self-noise level permits the microphone to be used at high gain levels without the risk of additional noise
Even at large distances, the microphone operates with a high signal-to-noise ratio, allowing the freedom of movement and creativity that can be important to an artist
Transformerless output circuit allows the microphone signals to be transmitted through long cables without loss of sound
Mechanical Features
Robust construction for dealing with the demands of live performance
Thick-walled metal housing provides effective protection against handling noise
Microphone head grille is made of hardened steel
If required, the grille can easily be unscrewed to permit cleaning of the interior acoustic filters
Specifications
Type
Handheld
Polar Pattern
Supercardioid
Element Type
Condenser
Sound Field
Mono
Orientation
End Address
Controls
Low Cut/HPF
Circuitry
Solid-State
Frequency Response
20 Hz to 20 kHz
Maximum SPL
150 dB
Sensitivity
-47 dBV
Equivalent Noise Level
28 dB (CCIR) 18 dB (A-Weighted)
Analog Output Connector
1x XLR 3-Pin Male
Power Sources
Phantom Power
Operating Voltage
48 V
Color
Nickel
Dimensions
ø: 1.9 x L: 7.1" / ø: 48 x L: 180 mm
Weight
10.6 oz / 300 g
In The Box
Neumann KMS 105 Live Vocal Condenser Microphone (Nickel)