2.4 GHz Wireless System for Electric Guitars and Basses
The WL-60 from BOSS is a wireless system for electric guitarists and bassists. Its form factor consists of a bodypack transmitter that clips to your belt and is where you plug your instrument. The receiver is the size of a small stompbox and sits on your pedalboard. You can plug the receiver into the first pedal of your chain.
The system automatically scans 14 channels for the strongest signal, and you're good to go. Now you can walk across the stage and not worry about dragging all your gear behind you. Latency is as low as 2.3 ms, and the system gives you a 20 Hz to 20 kHz frequency response to ensure none of your tone is lost in the wireless world.
The transmitter and receiver both accept battery power, though the receiver also sports an input for a separately available AC adapter. Should you power the receiver from an adapter, you can daisy-chain power to another pedal from the DC output.
Powered by BOSS proprietary wireless technology
Automatic 14-channel scanning makes setup quick and uncomplicated
Large LCD shows channel status, wireless strength, battery life, and more
Stompbox-size receiver fits easily on your pedalboard
Bodypack transmitter works with nearly any instrument and runs for up to 25 hours on two AA alkaline batteries
65' line-of-sight transmission range
Short cable included for connecting the transmitter to a guitar or bass
Receiver powered by AC adapter (separately available) or the included two AA alkaline batteries
Convenient DC output on the receiver for powering other pedals (when using AC adapter)
Instrument input for using a standard cable without removing the receiver from a pedalboard
Included WL-60T Transmitters also available separately for backup and outfitting additional stage instruments
Specifications
System
Wireless Technology
Analog
Number of RF Channel Frequencies
14
Included Transmitters
1x Plug-On
RF Channel Scanning
Auto-Scan
Max Operating Range
65' / 19.8 m
Max Transmitters per Band
1
Modulation
FM
Receiver
Receiver Type
Pedalboard
Mounting Options
Pedalboard (with Included Hardware)
Number of Audio Channels
1
Audio I/O
1x 1/4" TS Female Unbalanced Input
1x 1/4" TS Female Unbalanced Output
Frequency Response
20 Hz to 20 kHz
Impedance
1/4" Input: 1 Megohms
1/4" Output: 1 Kilohms
Power Requirements
AC/DC Power Adapter, Battery Battery Type 2x AA (Included, Replaceable)
Approx. Battery Life
10 Hours
Display & Indicators
Graphic LCD
Dimensions
2.8 x 4.7 x 2.1" / 70 x 120 x 54 mm (without Mounting Hardware)
2.8 x 4.7 x 2.2" / 70 x 120 x 57 mm (with Mounting Hardware)