AUDIO-TECHNICA AT-LP140XP-BK | Professional Direct Drive Manual Turntable

AT-LP140XP-BK 

Professional Direct Drive Manual Turntable

The black Audio-Technica AT-LP140XP Direct Drive Professional DJ Turntable delivers a host of features that are suitable for use in nightclub DJ booths and mobile and home DJ applications. The AT-LP140XP features a rugged cast aluminum construction that houses a high-torque DC motor and a balanced S-shaped tonearm. The AT-XP3 DJ cartridge is included and premounted to an AT-HS6 universal 1/2"-mount headshell.

Additional professional features include a start/stop button, forward and reverse play, selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with ±8%, ±16%, and ±24% adjustment ranges, a stroboscopic platter with speed indicator, a retractable plug-type stylus target light, and a removable hinged dust cover. The Audio-Technica AT-LP140XP also includes a counterweight, felt mat, and 45 rpm adapter.

• Experience high-fidelity audio and professional DJ performance
• Direct-drive, high-torque servo motor with speed stabilization
• Fully manual operation
• Adjustable dynamic anti-skate control
• Selectable 33 1/3/45/78 rpm speeds
• Professional anti-resonance, mass-damped, die-cast aluminum platter with felt mat
• AT-HS6 universal ½" mount headshell and AT-XP3 DJ cartridge with 0.6 mil conical bonded stylus
• Balanced S-shaped tonearm with hydraulically damped lift control, height adjustment, and lockable rest
• Dedicated phono-level output (5.5 mV)
• Stroboscopic platter with speed indicator
• Forward/reverse operation and variable pitch control with quartz speed lock
• Retractable plug-type target light for easier cueing in low light
• Damped base construction for reduced low-frequency feedback coloration
• Includes: detachable RCA output cable (dual RCA male to dual RCA male), power cable, 45 rpm adapter, counterweight, felt mat, and removable hinged dust cover

Specifications

Cartridge

• Cartridge
  • AT-XP3
• Frequency Response
  • 20 Hz to 18 kHz
• Channel Separation
  • >20 dB at 1 kHz
• Tracking Force
  • Vertical Tracking Force: 2.0 to 4.0 g (3.0 g Standard)
• Stylus
  • Stylus Construction: Bonded Round Sank
  • Stylus Shape: 0.6 mm Conical
  • Stylus Cantilever: Carbon Fiber-Reinforced ABS
• Output
  • 5.5 mV at 1 kHz, 5 cm/sec
• Channel Balance
  • 2.0 dB (1 kHz)
• Mount
  • 0.5" / 12.7 mm
• Replacement Stylus
  • ATN-XP3

Turntable

• Type
  • 3-Speed, Fully Manual
• Motor
  • Direct Drive High-Torque DC Motor
• Speeds
  • 33 1/3, 45, 78 rpm
• Pitch Control Range
  • ±8%, ±16%, and ±24%
• Turntable Platter
  • Die-Cast Aluminum
• Torque
  • Starting Torque: >2.2 kgf cm
• Wow and Flutter
  • <0.2% (WTD) @ 3 kHz (JIS)
• Signal-to-Noise Ratio
  • >50 dB
• Output Level
  • 5.5 mV nominal at 1 kHz, 5 cm/sec

Tonearm

• Type
  • Balanced S-Shaped Tonearm with Detachable Headshell
• Effective Arm Length
  • 9.1" / 230.5 mm
• Overhang
  • 0.6" / 16.0 mm
• Tracking Error Angle
  • <3°
• Cartridge Weight
  • Applicable Cartridge Weight: 3.5 to 8.5 g
• Anti-Skating Range
  • 0 to 4 g

General

• Power
  • Power Supply Requirements: 115/230 VAC, 60/50 Hz
  • Power Consumption: 11 W
• Dimensions
  • 17.8 x 13.9 x 6.2" / 452.1 x 352.0 x 158.5 mm
• Weight
  • 22.0 lb / 10.0 kg