Facebook Pixel
TC HELICON MIC Mechanic 2 Vocal Effects Pedal W/reverb, Pitch Correction & Adaptive Tone

TC HELICON MIC Mechanic 2 Vocal Effects Pedal W/reverb, Pitch Correction & Adaptive Tone

DBX 166XS Dual Compressor Limiter Gate

DBX 166XS Dual Compressor Limiter Gate

DBX 1231 Dual 31 Band Graphic Eq

CA$545.99
Out Of Stock
SKU
92455
  • Catalog #: DBX1231V






Note: Stock availability may not be accurate, please contact your preferred location to confirm.   


Vancouver Store
728 Granville St.
Vancouver, BC, V6Z 1E4
604-685-8471
  Reserve from this store Out Of Stock

Coquitlam Store
2560 Barnet Hwy.,
#116 Coquitlam, BC, V3H 1W3
604-941-8447
  Reserve from this store Out Of Stock

Langley Store
19638 Fraser Highway
Langley, BC, V3A 4C5
604-532-8303
  Reserve from this store Out Of Stock

North Vancouver Store
#800-801 Marine Drive
North Vancouver, BC, V7P 3K6
604-988-9974
  Reserve from this store Out Of Stock

Surrey Store
#157-10090 152nd Street
Surrey, BC, V3R 8X8
604-588-3200
  Reserve from this store Out Of Stock

Richmond Store
#150-3631 No. 3 Road
Richmond, BC, V6X 2B9
604-273-6661
  Reserve from this store Out Of Stock

Victoria Store
#105-2401D Millstream Road
Victoria, BC, V9B 3R5
250-383-5222
  Reserve from this store Out Of Stock

Nanaimo Store
#10-6894 Island Hwy. North
Nanaimo, BC, V9V 1P6
250-390-2626
  Reserve from this store Out Of Stock

1231 Dual Channel 31-Band Equalizer

The dbx® 12 Series were designed to meet the needs of the most demanding sound reinforcement environments, while offering the simplicity of straightforward controls. The 1231 provides standard features like dual-channels, 31 1/3 octave bands, ISO frequency centers, +/- 12 dB input gain range, and switchable 40Hz/18 dB per octave low-cut filters, but also includes other insightful features. These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS connectors for installation ease; balanced inputs and outputs for quiet operation; and chassis/signal ground lift capabilities for quick hum isolation. The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years of maintenance-free operation in any application. The magnetically isolated transformer, electronically balanced/unbalanced inputs and servo balanced/unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire relay bypass with 2 second power up delay were steps our engineers took to ensure compatibility for all installations. Only the best components were utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR (ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail is contained in a 3U steel/aluminum chassis.

Features

  • Switchable boost/cut ranges of ±6 or ±15 dB
  • Electronically balanced/unbalanced inputs
  • Servo balanced/unbalanced outputs
  • RF filtered inputs and outputs
  • XLR, Barrier Strip, and 1/4" TRS connectors
  • -12dB/+12dB input gain range
  • 18dB/octave 40Hz Bessel low-cut filter
  • Chassis/signal ground lift capability
  • Internal power supply transformer
  • Power-off hardwire relay bypass with 2-second power-up delay

Specifications

Input Connectors 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
Input Type Electronically balanced/unbalanced, RF filtered
Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm
Max Input >+21dBu balanced or unbalanced
CMRR >40dB, typically >55dB at 1kHz
Output Connectors 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
Output Type Impedance-balanced/unbalanced, RF filtered
Output Impedance Balanced 200 ohm, unbalanced 100 ohm
Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
Bandwidth 20Hz to 20kHz, +0.5/-1dB
Frequency Response <10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range
Dynamic Range 109dB; 115dB
Signal to Noise Ratio 90dB, 97dB
THD+Noise <0.005%
Interchannel Crosstalk <-80db, 20Hz to 20kHz
Bypass Switch Bypasses the graphic equalizer section in the signal path
Low cut Switch (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
Range Switch (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
I/O Meter 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
Indicators EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
Power Consumption 24W
Power Connector IEC receptacle
Dimensions 5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm)
设备重量 10.6 lbs.
Shipping Weight 11.6 lbs.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account